Mounting With An Enzo Rack Mount Adapter; Mounting With The Surface Mount Brackets - AMX NMX-MM-1000 Administrator's Manual

Mounting with an Enzo Rack Mount Adapter

The NMX-MM-RKA Enzo Rack Mount Adapter (FG3211-60) is another option for mounting the Enzo in a rack. The rack mount
adapter ships with four screws used for mounting the Enzo to the rack mount adapter and the rack mount adapter to the rack.
Perform these steps to mount the Enzo using a rack mount adapter.
1. Use two of the provided screws to secure the Enzo to the rack mount adapter (see step 1 in FIG. 9).
2
NMX-MM-RKA Enzo Rack Mount Adapter
FIG. 9
2. Use the two remaining screws to secure the rack mount adapter to the rack (see step 2 in FIG. 1).

Mounting with the Surface Mount Brackets

The Surface Mount Brackets are designed for mounting a single module (to a wall, on or under a desk, etc.) The brackets may be
attached to mount the top or the bottom flush with the mounting surface.
Insert the #4-40 3/16 inch pan head screws (provided) as shown in FIG. 10 and tighten. Brackets can either align flush with the
top or with the bottom.
Installing Surface Mount Brackets
FIG. 10
Administrators Guide - NMX-MM-1000 Enzo Meeting Presentation System
1
1
2
Installation
9