Table of Contents
Advertisement
Understanding the printer menus
Menu item
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Isolated
Toner Darkness
1–10
Enhance Fine Lines
Off
On
Gray Correction
Auto
Off
Brightness
‑6 to 6
Contrast
0–5
Job Accounting menu
Note: This menu item appears only when a formatted, working scanner hard disk is installed. Make sure the scanner
hard disk is not read/write‑ or write‑protected.
Description
Adjusts pixels to print a sharper image.
Note: Off is the factory default setting.
Lightens or darkens the print
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enables a print mode preferable for files such as architectural drawings, maps, electrical
circuit diagrams, and flow charts
Notes:
•
Off is the factory default setting.
•
You can set this option from the software program. For Windows users, click
File > Print, and then click Properties, Preferences, Options, or Setup. For
Macintosh users, choose File > Print, and then adjust the settings from the print
dialog and pop‑up menus.
•
To set Enhance Fine Lines using the Embedded Web Server, type the network
printer IP address in the address field of your Web browser.
Allows the user to print mid‑gray images
Note: Auto is the factory default setting.
Adjusts brightness in color print jobs
Notes:
•
0 is the factory default setting.
‑6 is the maximum decrease. 6 is the maximum increase.
•
•
This does not affect files where CMYK color specifications are being used.
Adjusts contrast in color print jobs
Notes:
•
0 is the factory default setting.
•
This does not affect files where CMYK color specifications are being used.
221
Advertisement
Table of Contents
