Table of Contents
Advertisement
Understanding the printer menus
Use
Manual Answer Code
0–9
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multipurpose Feeder
Sides (Duplex)
Off
On
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
Multipurpose Feeder
Output Bin
Standard Bin
Bin [x]
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Print
Print and Forward
Forward
To
Enter a code on the telephone number pad to begin receiving a fax.
Notes:
•
9 is the factory default setting.
•
This menu item is used when the scanner shares a line with a telephone.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two‑sided (duplex) printing for incoming fax jobs.
Note: Off is the factory default setting.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify where the printer picks the separator sheet.
Note: Tray 1 is the factory default setting.
Specify a bin for received faxes.
Note: Standard Bin is the factory default setting.
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
200
Advertisement
Table of Contents
