Moving The Scanner And The Printer - Lexmark MX6500E User Manual

Maintaining the scanner and the printer
3
Squeeze both sides of the empty staple case with your fingers, and then remove the staple case from the cartridge.
4
Insert the front side of the new staple case into the staple cartridge, and then push the rear side into the cartridge.
5
Push the staple cartridge into the finisher until it clicks into place.
6
Close the stapler door.

Moving the scanner and the printer

Moving the scanner
Before moving the scanner
CAUTION—POTENTIAL INJURY: Before moving the scanner, follow these guidelines to avoid personal injury or
scanner damage:
• Turn off the scanner using the power switch, and then unplug the power cord from the wall outlet.
•
Disconnect all cords and cables from the scanner before moving it.
Warning—Potential Damage: Damage to the scanner caused by improper moving is not covered by the scanner
warranty.
1
1
2
1
258