Faxing
Customizing fax settings
Changing the fax resolution
Settings range from Standard (fastest speed) to Ultra Fine (slowest speed, best quality).
1
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, navigate to:
Fax > enter the fax number > Options
4
From the Resolution area, touch the arrows to change to the resolution you want.
5
Touch Fax It.
Making a fax lighter or darker
1
Load an original document facedown, long edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
3
From the home screen, navigate to:
Fax > enter the fax number > Options
4
Adjust the fax darkness, and then touch Fax It.
Viewing a fax log
1
Type the scanner IP address in the address field of your Web browser.
If you do not know the IP address or host name of the scanner, then you can:
•
View the information on the scanner control panel home screen, or in the TCP/IP section under the
Networks/Ports menu.
•
Print a network setup page or menu settings page and locate the information in the TCP/IP section.
2
Click Settings > Reports > Fax Job Log or Fax Call Log.
Blocking junk faxes
1
Type the scanner IP address in the address field of your Web browser.
137