Table of Contents
Advertisement
Additional scanner and printer setup
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch a
metal surface on the scanner before touching any system board electronic components or connectors.
1
Unpack the ISP kit.
1
ISP
2
Plastic mounting bracket
3
Thumbscrews
2
Access the system board. For more information, see
3
Remove the scanner hard disk.
Note: The hard disk must be removed first before installing an ISP.
a
Unplug the hard disk interface cable from the system board.
"Accessing the system board" on page
39
34.
Advertisement
Table of Contents
