Table of Contents
Advertisement
Understanding the printer menus
Use
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Forward to Shortcut
Block No Name Fax
Off
On
Banned Fax List
Holding Faxes
Held Fax Mode
Off
Always On
Manual
Scheduled
Fax Holding Schedule
Punch
Off
On
Staple
Off
1 staple
Use
Transmission Log
Print log
Do not print log
Print only for error
Receive Error Log
Print Never
Print on Error
Auto Print Logs
On
Off
Log Paper Source
Tray [x]
Multipurpose Feeder
To
Specify the type of recipient to which faxes will be forwarded.
Notes:
•
Fax is the factory default setting.
•
This menu is available only from the scanner Embedded Web Server.
Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Enable the list of blocked fax numbers stored in the scanner.
Enable fax holding all of the time or according to set schedule.
Note: Off is the factory default setting.
Specify whether prints are punched.
Note: Off is the factory default setting.
Specify whether prints are stapled.
Note: Off is the factory default setting.
To
Enable printing of a transmission log after each fax job.
Note: "Print log" is the factory default setting.
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Enable automatic printing of fax logs.
Notes:
•
On is the factory default setting.
•
Logs print after every 200 fax jobs.
Specify the paper source used for printing logs.
Note: Tray 1 is the factory default setting.
201
Advertisement
Table of Contents
