Table of Contents
Advertisement
Understanding the printer menus
Supplies menu
Menu item
Replace Supply
Separator Pad
Pick Roller
Separator Pad
OK
Replace
Pick Roller
OK
Replace
Paper menu
Default Source menu
Use
Default Source
Tray [x]
Multipurpose Feeder
Manual Paper
Configure MP menu
Use
Configure MP
Cassette
Manual
First
Description
Provides the option to reset the supply counter for the
separator pad and pick roller
•
Select Yes to reset the supply counter.
•
Select No to exit.
Shows the status of the separator pad
Shows the status of the pick roller
To
Set a default paper source for all print jobs.
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder to appear as a menu setting.
•
If two trays contain paper of the same size and type, and the trays have
the same settings, then the trays are automatically linked. When one tray
is empty, the print job continues using the linked tray.
To
Determine when the printer selects paper from the multipurpose feeder.
Notes:
•
Cassette is the factory default setting. Cassette configures the
multipurpose feeder as the automatic paper source.
•
Manual sets the multipurpose feeder only for manual‑feed print jobs.
•
First configures the multipurpose feeder as the primary paper source.
150
Advertisement
Table of Contents
