Lexmark MX6500E User Manual page 219

Understanding the printer menus
Use
Collate
1,1,1 ‑ 2,2,2
1,2,3 ‑ 1,2,3
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Source
Tray [x]
Multipurpose Feeder
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver Border
None
Solid
To
Stack the pages of a print job in sequence when printing multiple copies.
Notes:
"1,2,3 ‑ 1,2,3" is the factory default setting.
•
•
On stacks the print job in sequence.
Specify whether blank separator sheets are inserted.
Notes:
•
None is the factory default setting.
• Between Copies inserts a blank sheet between each copy of a print job if
Collate is set to "1,2,3 ‑ 1,2,3." If Collate is set to "1,1,1 ‑ 2,2,2," then a blank
page is inserted between each set of printed pages, such as after all page 1s
and after all page 2s.
•
Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of a print job. This
setting is useful when printing transparencies or when inserting blank pages in
a document.
Specify the paper source for separator sheets.
Notes:
•
Tray 1 (standard tray) is the factory default setting.
•
From the Paper menu, set Configure MP to "Cassette" for Multipurpose
Feeder to appear as a menu setting.
Print multiple‑page images on one side of a paper.
Notes:
•
Off is the factory default setting.
• The number selected is the number of page images that will print per side.
Specify the positioning of multiple‑page images when using Paper Saver.
Notes:
• Horizontal is the factory default setting.
•
Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and
landscape.
Print a border when using Paper Saver.
Note: None is the factory default setting.
219