Job Accounting Menu - Lexmark M5163dn User Manual

Understanding the printer menus
Use
Brightness
‑6 to 6
Contrast
0–5

Job Accounting menu

Note: This menu item appears only when a printer hard disk is installed. Make sure that the hard disk is not
read/write‑ or write‑protected.
Use
Job Accounting Log
Off
On
Job Accounting Utilities
Accounting Log Frequency
Daily
Weekly
Monthly
Log Action at End of Frequency
None
E‑mail Current Log
E‑mail & Delete Current Log
Post Current Log
Post & Delete Current Log
Log Near Full Level
Off
1–99
Log Action at Near Full
None
E‑mail Current Log
E‑mail & Delete Current Log
E‑mail & Delete Oldest Log
Post Current Log
Post & Delete Current Log
Post & Delete Oldest Log
Delete Current Log
Delete Oldest Log
Delete All Logs
Delete All But Current
To
Adjust the printed output either by lightening or darkening it. You can conserve
toner by lightening the output.
Note: 0 is the factory default setting.
Adjust the contrast of printed objects.
Note: 0 is the factory default setting.
To
Set if the printer creates a log of the print jobs it receives.
Note: Off is the factory default setting.
Print and delete log files or export them to a flash drive.
Set how often a log file is created.
Note: Monthly is the factory default setting.
Set how the printer responds when the frequency threshold expires.
Note: None is the factory default setting.
Specify the maximum size of the log file before the printer executes the Log
Action at Near Full.
Note: 5 is the factory default setting.
Set how the printer responds when the hard disk is nearly full.
Notes:
•
None is the factory default setting.
•
The value defined in Log Near Full Level determines when this action is
triggered.
120