Table of Contents
Advertisement
Understanding the printer menus
AppleTalk menu
To access the menu, navigate to either of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network [x] > Network [x] Setup > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the network]
Standard USB menu
Menu item
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Enable or disable AppleTalk support.
Note: No is the factory default setting.
Show the assigned AppleTalk name.
Note: The AppleTalk name can be changed only from the Embedded Web
Server.
Show the assigned AppleTalk address.
Note: The AppleTalk address can be changed only from the Embedded Web
Server.
Provide a list of AppleTalk zones available on the network.
Note: The default zone for the network is the factory default setting.
Description
Sets the scanner to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When set to Off, the scanner does not examine incoming data. The scanner
uses PostScript emulation if the PS SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PS SmartSwitch is set to
Off.
Sets the scanner to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default language
Notes:
•
On is the factory default setting.
•
When set to Off, the scanner does not examine incoming data. The scanner
uses PCL emulation if the PCL SmartSwitch is set to On. It uses the default
printer language specified in the Setup menu if the PCL SmartSwitch is set to
Off.
170
Advertisement
Table of Contents
