Table of Contents
Advertisement
Copying
Copying on letterhead
1
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, navigate to:
Copy > Copy from > specify the size of the original document > Copy to > Manual Feeder
4
If you are printing on one side of the letterhead and using a finisher, then place the letterhead faceup, top edge
first in the multipurpose feeder.
Note: For the proper letterhead orientation, see
5
Select the size of the letterxhead.
6
Navigate to:
Continue > Letterhead > Continue > Copy It
Customizing copy settings
Copying to a different size
1
Load an original document facedown into the ADF or on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
On the home screen, touch Copy.
4
Touch Copy from > select the size of the original document >
5
Touch Copy to > select the size of the copy >
6
Touch Copy It.
Making copies using paper from a selected tray
1
Load an original document facedown, long edge first into the ADF tray or facedown on the scanner glass.
Notes:
•
Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
•
The ADF indicator light comes on when the paper is loaded properly.
2
If you are loading a document into the ADF tray, then adjust the paper guides.
"Loading the multipurpose feeder" on page
.
.
103
76.
Advertisement
Table of Contents
