Installing The Shelf Supports; Steam Generation System; Steam Cleaning; Removing The Shelf Supports - AEG BS8314001 User Manual

42 www.aeg.com
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all accessories after each use
and let them dry. Use a soft cloth with
warm water and a cleaning agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dish-
washer. It can cause damage to the
nonstick coating.

12.1 Steam Cleaning

1. Remove the worst of the dirt man-
ually.
2. Put 250 ml of water with 3 table-
spoons of vinegar directly into the
steam generator.
3. Activate the Steam Cleaning func-
tion in the main menu. The display
shows the duration of the function.
4. An acoustic signal sounds when the
programme is completed. Touch a
sensor field to deactivate the signal.
5. Wipe out the appliance with a soft
cloth. Remove the remaining water
from the steam generator.
6. Keep the appliance door open for
approximately 1 hour. Wait until the
appliance is dry.
12.2 Shelf supports
You can remove the shelf supports to
clean the side walls.

Removing the shelf supports

1
3
2
1. Carefully pull the supports up and
out of the front catch.
2. Lightly move the supports on the
front catch inwards.
3. Pull the supports out of the rear
catch.

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

12.3 Steam generation system

CAUTION!
Dry the steam generator after
each use. Remove the water with
the sponge.
Remove the limescale with water
and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel.
Follow the instructions of the
manufacturer.
Cleaning the water drawer and the
steam generator:
1. Put the water and vinegar mixture
(approximately 250 ml) through the
water drawer into the steam gener-
ator. Wait for approximately 10 mi-
nutes.
2. Remove the water and vinegar with
the sponge.
3. Put clean water (100 - 200 ml) into
the water drawer to flush the steam
generation system.
4. Remove the water from the steam
generator with the sponge and rub it
dry.
5. Keep the door open to let the appli-
ance dry fully.
12.4 Lamp
WARNING!
There is a risk of electrical shock.
The lamp and the lamp glass
cover can be hot.
Before you change the lamp:
• Deactivate the appliance.