Shelf Supports; Removing The Shelf Supports; Installing The Shelf Supports; Oven Ceiling - AEG EHA User Manual

18 www.aeg.com

9.1 Shelf supports

Removing the shelf supports

Installing the shelf supports

Install the shelf supports in the opposite
sequence.

9.2 Oven ceiling

You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
WARNING!
Deactivate the appliance before
you fold down the heating ele-
ment. Make sure that the appli-
ance is cold. There is a risk of
burns.
Folding down the heating element
1. Remove the shelf supports.
2
1
You can remove the shelf supports to
clean the side walls.
1. Pull the front of the shelf support
away from the side wall.
2. Pull the rear end of the shelf sup-
port away from the side wall and re-
move it.
2. Hold the heating element with two
hands at the front.
3. Pull it forwards against the spring
pressure and out along the supports
on the two sides.
4. The heating element folds down.
You can clean the oven ceiling.
Installing the heating element
1. Install the heating element in the
opposite sequence.
Install the heating element cor-
rectly above the supports on the
inner walls of the appliance.