Emc Notice - Barco Coronis 5MP User Manual

EMC notice

No specific requirement on the use of external cables or other
accessories except power supply.
With the installation of the device, use only the delivered power supply
or a spare part provided by the legal manufacturer. Using another can
result in a decrease of the immunity level of the device.
ELECTROMAGNETIC EMISSIONS
The B C Display is intended for use in the electromagnetic
ARCO ORONIS
environment specified below.
The customer or the user of the B
it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
This B C Display complies with appropriate medical EMC
ARCO ORONIS
standards on emissions to, and interference from surrounding
equipment. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must
C
ARCO ORONIS
Compliance Electromagnetic environment – guidance
Group 1 The B
ARCO
only for its internal function. Therefore, its
RF emissions are very low and are not likely
to cause any interference in nearby
electronic equipment
Class B
The B
ARCO
in all establishments, including domestic
Class D
establishments and those directly
connected to the public low-voltage power
supply network that supplies buildings used
for domestic purposes.
Complies
Display should assure that
C Display uses RF energy
ORONIS
C Display is suitable for use
ORONIS
Coronis 5MP
61