Viewing Modes - Barco Coronis 5MP User Manual

Viewing modes

A
BOUT VIEWING MODES
The B C Display can be used in two viewing modes:
ARCO ORONIS
Diagnostic
Text
As the B
ARCO
diagnostic environment, the diagnostic mode should always be
selected.
T
O SELECT A VIEWING MODE
Bring up the OSD main menu.
1
Navigate to the Configuration > Calibration menu.
2
Enter the Viewing Mode submenu.
3
Select Diagnostic/Text as desired and confirm.
4
This mode provides the full calibrated
luminance and is intended for using the
display for diagnostic purposes.
In this mode, the luminance is reduced to
approximately half of the luminance. This is
intended for using the display with office
applications such as word processing.
Please note that text mode is not
persistent, once powered off, the unit will
restart in diagnostic mode.
C Display is intended to be used in a
ORONIS
:
Coronis 5MP
41