Barco Coronis 5MP User Manual page 55

P
OWER CONNECTION
SUPPLY
Power requirements: The display must be powered using the
•
delivered medical approved 24 VDC SELV power supply.
The medical approved DC power supply must be powered by the
•
AC mains voltage (protective earth terminal).
T -
RANSIENT OVER VOLTAGE
If the equipment is not used for a long time, disconnect it from the AC
inlet to avoid damage by transient over-voltage.
To fully disengage the power to the unit, please disconnect the power
cord from the AC inlet.
P :
OWER CORDS
Utilize a UL-listed detachable power cord, 3-wire, type SJ or
•
equivalent, 18 AWG min., rated 300 V min., provided with a
hospital-grade type plug 5-15P configuration for 120V application,
or 6-15P for 240V application.
Do not overload wall outlets and extension cords as this may result
•
in fire or electric shock.
Mains lead protection (U.S.: Power cord): Power cords should be
•
routed so that they are not likely to be walked upon or pinched by
items placed upon or against them, paying particular attention to
cords at plugs and receptacles.
W
ATER AND MOISTURE
Never expose the display to rain or moisture.
Never use the display near water - e.g. near a bathtub, washbasin,
swimming pool, kitchen sink, laundry tub or in a wet basement.
V
ENTILATION
Do not cover or block the ventilation openings in the cover of the set.
When installing the display in a cupboard or another closed location,
-
DISPLAY WITH EXTERNAL
24 VDC
POWER
Coronis 5MP
55