Barco Coronis 5MP User Manual page 16

U
SING THE DUAL TILT
Unpack the dual tilt & swivel foot and place it on a solid surface.
1
Unpack the first display
2
Hold the display slightly angled with the logo downwards and
3
position the top of the mounting anchor, at the back of the display,
perfectly aligned on the top of the mounting clamp of the foot.
Push the downside of the display gently backwards until the
4
mounting clamp locks into the mounting anchor.
Verify that mounting clamp and mounting anchor are perfectly
5
fitting and that the display is firmly mounted.
Repeat steps 2 to 5 for the second display.
6
Limit transportation distances of the mounted displays and foot
system.
Pull out the foot lock clip.
7
Coronis 5MP
16
&
SWIVEL FOOT
1
2
Figure 9: Mounting a display