Keys Sound; Ethernet Over Usb - Barco Coronis 5MP User Manual

Hide thumbs Also See for Coronis 5MP:
Table of Contents

Advertisement

Keys sound

A
BOUT THE KEYS SOUND
By default, the keys will make a "beep" sound on every touch. However,
this sound can be disabled so that no sound will be heard when using
the keys.
T
/
O ENABLE
DISABLE THE KEYS SOUND
Bring up the OSD main menu.
1
Navigate to the Configuration > User Interface > Controls menu.
2
Enter the Sound submenu.
3
Select Enabled/Disabled as desired and confirm.
4

Ethernet over USB

A
.
BOUT ETH
OVER USB
By default, the Ethernet over USB will be disabled. This does not disable
the USB hub and still allows to make use of the display's USB
downstream connectors and any external devices connected to it
(keyboard, mouse, ...).
Please note that a connection from a PC USB downstream connector to
the display's USB upstream connector is required to be able to use this
functionality.
By enabling the Ethernet over USB, you allow the internal B
Display processor to communicate directly over USB with the connected
PC.
Enabling the USB endpoint is only recommended when you are
using a non-Barco display controller. If you are using a Barco
display controller, this communication will automatically be
done over the connected video cable(s).
Coronis 5MP
36
:
C
ARCO
ORONIS

Advertisement

Table of Contents
loading

Table of Contents