Barco Coronis 5MP User Manual page 15

To mount the display in landscape orientation:
Follow the same steps as for the portrait installation but hold the
1
display in landscape position to hook the panel on the foot. See
figure 8 below.
1
Figure 8: Attaching the panel to the display stand (landscape)
To release the panel from the display foot:
Push the push-button (3) at the rear of the panel. The button is not
2
visible on drawing because it is hidden by the display stand. See
figure 6 for portrait or figure 8 for landscape.
Pull the bottom of the panel towards you and at the same time lift
3
the panel from the stand attachment plate.
To change the display orientation:
Do not change the display orienatation by turning the panel
when it is mounted on its stand.
To change from landscape to portrait or the other way around,
remove the panel from its stand and use the appropriate
mounting hooks as described above.
2
3
Coronis 5MP
15