Hibernate - Barco Coronis 5MP User Manual

Hibernate

A
BOUT HIBERNATE
Enabling hibernation will not only switch off the backlight but will also
force the display to disable other functionalities so that power
consumption is further reduced to a minimum. This happens after a
specific period of time which can be manually adjusted.
Hibernate can only be enabled on your display when the DPMS
mode is enabled first. Therefore, please refer to "DPMS
mode" on page 38 to do this.
T /
O ENABLE DISABLE HIBERNATION ON YOUR DISPLAY
Bring up the OSD main menu.
1
Navigate to the Configuration > Power Management menu.
2
Enter the Hibernate submenu.
3
Select Enabled/Disabled as desired and confirm.
4
T
O SPECIFY THE HIBERNATE TIMEOUT
Bring up the OSD main menu.
1
Navigate to the Configuration > Power Management menu.
2
Enter the Hibernate Timeout submenu.
3
Set the timeout value as desired and confirm.
4
:
:
Coronis 5MP
39