Installing And Removing Fkm Fiber Port Modules; Preparation For Changing Fkm Fiber Port Modules - GarrettCom Magnum 4K24F Installation And User Manual

Magnum 4K24 Switches Installation and User Guide
3.4

Installing and Removing FKM Fiber Port Modules

from the chassis before attempting to remove
Failure to do so may result in damage to the unit
est débranché du châssis avant d'essayer au retirer
et/ou substitue toutes les cartes de FPM.
Le manque de faire ainsi le résultat dans les dommages à
Caution- Avoid Static Discharge: The Fiber port modules (like most electronic
equipment) are sensitive to static discharge. Use proper ESD measures
when handling port modules.
L'Attention Évitent La Décharge Statique: Les modules de port de fibre
(comme la plupart de matériel électronique) sont sensibles à la
décharge statique. Utilisez les mesures appropriées d'cEsd en
manipulant les modules gauches.
Changing FKM modules in a Magnum 4K24F Switch is a complex procedure that
requires great care. Please read the Port Module Insertion Guide and this 4K24 Manual
thoroughly before doing any field changes of FKM modules.
If you are installing an FKM, make sure the FKM Module package has all
necessary accessories to install it properly. The FKM Module package for field
installation comes along with an FKM Module and instructions enclosed, the Fiber Port
Module Insertion Guide.
3.4.1

Preparation for Changing FKM Fiber Port Modules

Step 1. Remove Chassis Cover
Magnum 4K24F chassis has top and bottom parts that are factory assembled
using 22 Philips-head screws. There are 7 screws located on the front-top of the unit and
three screws each on the left and right edges. Remove these screws. Once these are
www GarrettCom com . .
STOP!!!
Be sure the power cord is unplugged
and/or replace any FPM modules.
and may void the warranty.
ARRÊT!!!!
Soyez sûr que le code de puissance
l'unité et videra la garantie.
17
(10/04)