Circulate Fan On Time Setting; System Setting Defaults And Range - Lennox icomfort Wi-Fi Setup Manual

Circulate fan ON time setting

NOTE − If the circulate fan mode is on, a timer is set to measure all the time
that the fan is blowing, regardless if it is running to deliver heating or cooling
or just for circulation.
Circulate" is enabled on the user's home screen or system settings page.
It keeps air circulating from 15% to 50% percent of time. The following set-
tings approximate how long the fan will run at these typical settings:
15% (9 minutes fan run time per hour)
25% (15 minutes fan run time per hour)
35% (21 minutes fan run time per hour)
45% (27 minutes fan run time per hour).
Table 1 shows the range/condition and defaults for the system settings and
indicates the tools used to make changes.
506920−01 09/12
Table 1. System setting defaults and range
system range/
setting condition
Time and Date
Daylight Saving
Enabled/Disabled
Time
Circulate Fan 15 to 50% (in 1%
ON Time increments)
(alpha−numeric
System Name
characters)
Dealer Number
Dealer Name
Dealer Address
(alpha−numeric
characters)
Dealer Phone
Dealer Email
Dealer Website
Page 6
default use
see Page 7
Enabled
35%
use keyboard
tool to change
****
Lennox
use keyboard
tool to change
1−800−9−LENNOX
www.lennox.com