Lennox iComfort Wi-Fi® Thermostat Owner's Manual
Touch-screen programmable communicating thermostat
Hide thumbs
Also See for iComfort Wi-Fi® Thermostat:
- Owner's manual (21 pages) ,
- Owner's manual (26 pages)
Table of Contents
Advertisement
©2014 Lennox Industries Inc.
Dallas, Texas, USA
®
iComfort Wi-Fi
Thermostat
THIS MANUAL MUST BE LEFT WITH THE HOMEOWNER
FOR FUTURE REFERENCE
NOTICE
Use this thermostat only as described in this manual.
HOMEOWNER'S MANUAL
iComfort Wi-Fi
Touch-Screen Programmable Communicating Thermostat
CONTROLS
®
iComfort Wi-Fi
Web and Mobile
507342-01
Apps
2/2014
Supersedes 507200-01
General
Congratulations on choosing the iComfort Wi-Fi
programmable thermostat! The state-of-the-art technology built into this
device makes it easy for you to adjust your home's comfort settings while at
home or from a remote location (via Internet access)!
Help screens are just a touch away. Use this manual as an introduction to a
whole new world of home comfort.
Do not switch system to cool if the outdoor temperature is below 45°F
(7°C). This can damage the cooling system.
®
Thermostat
WARNING
®
touch-screen,
Advertisement
Table of Contents
Related Manuals for Lennox iComfort Wi-Fi® Thermostat
Summary of Contents for Lennox iComfort Wi-Fi® Thermostat
- Page 1 HOMEOWNER'S MANUAL ® iComfort Wi-Fi Thermostat ©2014 Lennox Industries Inc. Dallas, Texas, USA Touch-Screen Programmable Communicating Thermostat CONTROLS ® iComfort Wi-Fi Web and Mobile 507342-01 Apps 2/2014 Supersedes 507200-01 General ® Congratulations on choosing the iComfort Wi-Fi touch-screen, programmable thermostat! The state-of-the-art technology built into this...
-
Page 2: Table Of Contents
A lock icon at the bottom center of the screen (shown in the picture), ® When the iComfort Wi-Fi thermostat is used with a Lennox indoor or indicates the thermostat is either outdoor unit which includes a compatible communicating control, it partially or fully locked. -
Page 3: Start-Up
Start -Up In event of power failure WHAT YOU CAN DO FROM THE HOME SCREEN... —The thermostat will reboot after power is restored. When the reboot is complete, the HOME screen will return. The Home Screen provides you with convenient WHAT THE HOME SCREEN TELLS YOU... -
Page 4: User Preferences Quick Reference Chart
User Preference Quick Reference Chart (Use tools shown on page 5 to make changes) User Setting Feature Button Default Page Tools Available Settings Set up a program edit programs save energy See details Page 6 — Heating mode system settings COMFORT toggle Normal, Comfort (heat pump only) -
Page 5: Tools Used To Change Preferences
cool only network security key or passphrase password displays here as keys touched heat only auto heat or cool circulate emerg. heat programs typical menu options keyboard tool January 2012 09 : 39 am º set to time daylight format saving 12 HR enabled... -
Page 6: User Feature Screen And Help
In the example in Figure 4, the evening time has been disabled by touching User Features and Help (?) Screens and holding the time button for that time period. (Touch add setting to From the Home screen, touch the button to go to the Features screen. re-enable that time period.) Use the restore button to restore defaults for the The Features screen (figure 3) allows you access to edit programs, system preset programs. -
Page 7: System Settings
SYSTEM SETTINGS EDIT PROGRAMS my program Appears only select select program will follow these settings on all 7 days dehumidification humidification programs days whenXP25 is settings time cool-to heat-to fan mode settings installed summer week/weekend auto 06:00 am humidifier ClimateIQ heating humidifier individual days... -
Page 8: Display Settings
DISPLAY SETTINGS DISPLAY SETTINGS Touch display settings from the FEATURES screen (see figure 3). Figure 8 shows the DISPLAY SETTINGS screen and defaults. • Touch Temp scale button to toggle between ºF and ºC options. cobalt • Touch Background theme, screen saver, screen lockout, back- unlocked temp... -
Page 9: Alerts
If the system is allowed to run after a red alert has been issued, damage to the system may be caused. A red alert service info: ALERT (1) of (1) LENNOX is your signal to call for service immediately. 1-800-9LENNOX 02/23/2012 9:39 am www.lennox.com... - Page 10 MAIN ALERT SCREEN ALERT HISTORY clear button SCREEN service info: service info: reminder ( 1) of ( 4) reminder ( 1) of ( 4) Lennox Lennox 04/03/2012 02:39pm 04/03/2012 02:39pm 1-800-9-LENNOX 1-800-9-LENNOX Service Alert Code 3000 Service Alert Code 3000 www.lennox.com...
-
Page 11: Reminders
SERVICE ALERT CODES Number Value Number Value Number Value Number Value Number Value 3000 Filter 1 3002 Humidifier Pad 3004 Maintenance 4000 User Wi-Fi state change, 4002 Image file download failed disable 3001 Filter 2 3003 UV Light 3005 PureAir Maintenance 4001 Firmware download failed REMINDERS... - Page 12 If you have performed the required maintenance, choose clear to clear the service info: reminder. This will prompt the question, “was action taken?” If the answer is alerts ( 1) of ( 1) Lennox 9:39 am May 23, 2012 1-800-9-LENNOX “X”...
-
Page 13: Service Information And Help (?)
Figure 19 shows an example of the HELP screen and a Select My Account, then My Dealer tab and touch change dealer button. pop-up. SERVICE INFORMATION Touch any line to edit it Dealer Name Lennox enter set temp outdoor away indoor temperature... -
Page 14: Adjusting Room Temperature, Away Mode, Program Change, Clock And Weather
Adjusting Room Temperature, Away Mode, Program Change, Clock and Weather Adjust temperature when programming is OFF — When the system is currently using energy saving AWAY settings programming is OFF, the system mode button (shown in figure 20, labeled heat or cool) indicates a manual mode (no mention of “program”). In this cancel indoor temperature set temp... - Page 15 (program (mode settings (mode cool only outdoor button) menu) button) indoor temperature set temp temperature indoor temperature set temp enter heat only away summer spring... heat spring... program is heat or cool program winter cool is ON cool-to cool-to spring/fall fan is AUTO fan is emerg.
- Page 16 You may select one of the hour buttons (1, 2, 8, or 24) if desired. If you select CLOCK SETTINGS custom, a time/date screen appears and you have the option of setting the hold for any length of time (see figure 25). set current date and January 2012 time...
-
Page 17: Setting Zoning Controls
Setting Zoning Controls AVAILABLE ZONES When a zone control system has been installed and enabled by the installer, Zone 3 Zone 3 Living Room the homeowner has the option to control temperature or set away mode for each enabled zone. Touch the zone location button as shown below to display the AVAILABLE ZONES screen. - Page 18 If zones 2, 3, or 4 are set for Away Mode on the Home Screen, the Away Mode icon appears at the lower-right of each zone button on the AVAILABLE (mode indoor temperature set temp ZONES screen. button) enter heat ADJUSTING AWAY MODE TEMPERATURE OR CANCEL AWAY cool MODE PER ZONE...
-
Page 19: Setting Humidity Controls
If your system has one or both of Touch the set-to button to bring up the up/down arrows. Use these arrows to these features and the controls are not visible, contact your Lennox adjust the humidity level to the desired setting. -
Page 20: Connecting To A Home Wi-Fi Router
Dehumidification Controls (Non-Communicating Outdoor Unit): Touch Connecting to a Home Wi-Fi Router the humidifier setting button you want to adjust. If it says de-humidifier OFF, one touch will display a selection for OFF, MEDIUM and HIGH. Select MEDIUM or HIGH to bring on the set-to button. When you touch the set-to Check the router utility program or contact service provider for help. - Page 21 1. Press and release Wi-Fi in the lower left corner of the HOME screen ESTABLISHING A WI-FI CONNECTIONS There are two methods to setup your Wi-Fi connection. Select either NETWORK SETTINGS or connection status. outdoor Method 1 — Network Settings Method temperature indoor temperature set temp...
- Page 22 ESTABLISHING A WI-FI CONNECTIONS TO A HIDDEN HOME NETWORK Open connection (no password required) 1. When connecting to a hidden network, press the add new network icon to continue. 2. Enter the network name (SSID) using the onscreen keyboard and press the save button.
-
Page 23: Troubleshooting Wi-Fi Connections
2. Select the router icon to choose the desire W-Fi network. When Troubleshooting Wi-Fi Connection selecting a: • unsecured connection a screen will appear with two options, The following terminology is used in this troubleshooting section: connect and router info. Press connect to continue. •... - Page 24 The signal strength can be viewed from the thermostat interface. Use the 1. From the home screen, touch the Lennox logo (bottom right-hand following procedure to discover the Wi-FI router signal strength at the corner of screen) and hold for 5 seconds.
-
Page 25: Registering Icomfort Wi-Fi ® Thermostat
4. Another pop-up screen will appear notifying the user to check their Registering the Thermostat email. REGISTRATION FOR ONLINE ACCESS An email has been sent to 1. From the WI-FI SETTINGS screen, press either the thermostat not xxxxxxxxxx@lennoxind.com registered icon or the connection status icon and select the server with instructions on how to register your thermostat. -
Page 26: Pc Welcome Screen, Interactive Demo And Gelaskins
NOTE - Firmware updates will not affect installer or user thermostat settings. Personal Computer Welcome Page; Interactive Demo; Both will be retained after the update. ® Online iComfort information; Using Gelaskins WI-FI SETTINGS firmware thermostat connection Wi-Fi update registered connected status enabled auto...