Key Functions; Changing The Boot Sequence; Changing Printer Modes - Dell Latitude C600 User Manual

The box on the left half of screens 1, 2, 4, and 5 lists options that define the installed hardware in your
computer and the power conservation and security features for your computer.
Fields next to the options contain settings or values. You can change those values that appear bright
on the screen. Options or values that you cannot change (because they are determined or calculated
by the computer) appear less bright.
Help
The box on the upper-right half of screens 1, 2, 4, and 5 displays help information for the option with a
currently highlighted field.
Computer data
The box in the lower-right corner of screens 1, 2, 4, and 5 displays information about your computer.

Key functions

The line of boxes across the bottom of all screens lists keys and their functions within the system setup
program.

Changing the Boot Sequence

To change the computer's boot sequence, change the device settings in the Boot First device, Boot
Second device, or Boot Third device options.
Boot Sequence
Option
Boot First device
Boot Second device Tells the computer where to look if it cannot find the software it
Boot Third device
For a change in the boot sequence options to take effect, you must reboot your computer.
The term boot refers to the computer's start-up procedure. When you turn on the computer, it "bootstraps"
itself into an operational state by loading into memory a small program, which in turn loads the necessary
operating system. The boot sequence tells the computer where to look to find the software needed to start
the operating system.

Changing Printer Modes

Set the Parallel Mode option according to the type of printer or device connected to the parallel port. The
Description
Tells the computer where to look first for the software it needs
to start the operating system
needs to start the operating system on the drive identified in
Boot First device
Tells the computer where to look if it cannot find the software it
needs to start the operating system on the drive identified in
Boot First Device or Boot Second device
Default
Diskette Drive
Internal HDD
None