Microsoft® Windows® Logo Key Functions; Customizing The Touch Pad And Track Stick - Dell Precision M2300 User Manual

<Fn><Esc> Activates a power management mode. You can reprogram this keyboard shortcut to activate a different power management mode using the
Advanced tab in the Power Options Properties window (see
<Fn><F1> Puts the computer into hibernate mode. Dell QuickSet is required (see Dell™ QuickSet).
Microsoft® Windows® Logo Key Functions
Windows logo key and <m> Minimizes all open windows.
Windows logo key and Restores all minimized windows. This key combination functions as a toggle to restore minimized windows following the use of
<Shift><m> the Windows logo key and <m> key combination.
Windows logo key and <e> Runs Windows Explorer.
Windows logo key and <r> Opens the Run dialog box.
Windows logo key and <f> Opens the Search Results dialog box.
Windows logo key and Opens the Search Results-Computer dialog box (if the computer is connected to a network).
<Ctrl><f>
Windows logo key and Opens the System Properties dialog box.
<Pause>
To adjust keyboard operation, such as the character repeat rate, open the Control Panel, click Printers and Other Hardware, and click Keyboard. For
information about the Control Panel, access the Help and Support Center (click Start® Help and Support).
Touch Pad
The touch pad detects the pressure and movement of your finger to allow you to move the cursor on the display. Use the touch pad and touch pad buttons as
you would use a mouse.
To move the cursor, lightly slide your finger over the touch pad.
l
To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button.
l
To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad. On the second tap, leave your finger on the
l
touch pad and move the selected object by sliding your finger over the surface.
To double-click an object, position the cursor on the object and tap twice on the touch pad or use your thumb to press the left touch-pad button twice.
l
You can also use the track stick to move the cursor. Press the track stick left, right, up, or down to change the direction of the cursor on the display. Use the
track stick and track stick buttons as you would use a mouse.

Customizing the Touch Pad and Track Stick

You can use the Mouse Properties window to disable the touch pad and track stick or adjust their settings.
1. Open the Control Panel, and then click Mouse. For information about the Control Panel, access the Help and Support Center (click Start® Help and
Support).
2. In the Mouse Properties window:
Click the Device Select tab to disable the touch pad and track stick.
l
Click the Touch Pad tab to adjust touch pad and track stick settings.
l
3. Click OK to save the settings and close the window.
Accessing Power Options Properties).