Download Print this page

Advertisement

Dropped or
Damaged
Computer
No Power at All
Fill out the
If you don't have
any power, none
of the lights on the
keyboard or drives
light up and you won't
hear sounds from any
drives. See also
"Only
Partial
Power."
8. Ground yourself by touching one of the unpainted metal connectors on the I/O
panel.
9. Replace the memory module(s).
10. Replace the memory module cover.
11. Reinstall the hard-disk drive.
12. Reinstall the modular bay and PC Cards that you removed.
13. Replace any batteries that you removed.
14. Reconnect the computer and peripherals to an electrical outlet and turn them
on.
15. Does the computer work properly?
Yes. The problem is resolved.
No. If the computer is able to boot, run the
computer damage. If the computer is unable to boot, see
All." If you cannot identify the damaged component(s), call Dell for
technical assistance. (See
1. Save and close any open files, exit any open application programs, and shut
down the computer.
2. Disconnect the AC adapter from the electrical outlet and disconnect the AC
adapter from the computer. Turn off any attached devices and disconnect them
from the electrical outlet and then from the computer.
3. Ground yourself by touching one of the metal connectors on the back of the
computer.
4. Remove any
installed batteries
5. Remove the
hard-disk
6. Remove the
memory module cover
7. Reinstall the memory modules, making sure to seat them properly.
8. Replace the memory module cover.
9. Reinstall the hard-disk drive.
10. Verify that any installed PC Cards are properly seated in the PC Card
connectors.
11. Reinstall the battery or other device(s) removed from the modular bay. Verify
that the device(s) is seated properly.
12. Reconnect the computer and peripherals to the electrical outlet and turn them
on.
13. Run the
Dell Diagnostics
14. If the computer does not operate properly, fill out the
Then
call Dell
for technical assistance.
Diagnostics Checklist
1. Connect the
AC adapter
2. Remove all devices, including internal devices such as the
disk
drive, and battery.
3.
Turn on
the computer.
4. Does the computer turn on properly?
Yes. The problem is resolved.
Dell Diagnostics
"Getting
Help".)
or other devices from the
drive.
and the memory module(s).
to verify that the computer is operating properly.
as you perform the following steps:
to the computer and to an electrical outlet.
to identify
"No Power at
modular
bay.
Diagnostics
Checklist.
diskette
drive,
hard-

Advertisement

   Related Manuals for Dell Latitude C600

This manual also for:

Latitude c500

Comments to this Manuals

Symbols: 0
Latest comments:
  • Carlos Aug 23, 2017 01:58:
    Como reinicia meu not dell c600 para configurac​ao de fabrica
  • CARlos Aug 23, 2017 01:10:
    Como reiniciar meu notbook dell c600