Displaying The System Configuration; Show Boot Command; Show Boot; Show Config - Compaq AlphaServer 160 User Manual

Alphaserver gs80; alphaserver 160; alphaserver 320
Table of Contents

Advertisement

7.2

Displaying the System Configuration

View the system hardware configuration from the SRM console. It is
useful to view the hardware configuration to ensure that the system
recognizes
all
connections.
Use the following SRM console commands to view the system configuration.
Additional commands to view the system configuration are described in the
AlphaServer GS80/160/320 Firmware Reference Manual.

show boot*

show config

show device

show fru
show memory Displays configuration of main memory.
7.2.1

Show Boot Command

Use the show boot* command to list the boot environment variables.
Example 7–2 Show Boot*
P00>>> show boot*
boot_dev
boot_file
boot_osflags
boot_reset
bootdef_dev
booted_dev
booted_file
booted_osflags
devices,
memory
Displays the boot environment variables.
Displays the logical configuration of interconnects and buses
on the system and the devices found on them.
Displays the bootable devices and controllers in the system.
Displays the physical configuration of FRUs (field-replaceable
units).
dka0.0.0.1.1
a
OFF
dka0.0.0.1.1
configuration,
and
network
Operation
7-7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AlphaServer 160 and is the answer not in the manual?

Table of Contents