Scm Command-Line Interface; Scm Commands - Compaq AlphaServer 160 User Manual

8.7

SCM Command-Line Interface

The system control manager supports setup commands and commands
for managing the system.
reference, see the AlphaServer GS80/160/320 Firmware Reference
Manual.
Table 8–1 SCM Commands
Command
Clear {alert, error}
Crash
Disable {alert, remote}
Enable {alert, remote}
Erase
Fault
Halt
Hangup
Help
Init
Power
Quit
Reset
Set alert
8-14 AlphaServer GS80/160/320 User's Guide
See Table 8–1. For an SCM commands
Description
Clears firmware or hardware state (alert).
Clears SDD and TDD error logs (error).
Forces a crash dump at the operating system level.
Disable system alerts or remote access.
Enables system alerts or remote access.
Erases the current screen.
Emulates the control panel Fault button.
Halts the operating system.
Terminates a remote session, disconnecting the
modem.
Provides SCM command information.
Prepares modem to send alerts and receive
incoming calls.
Directs the SCM to supply power.
Exits the SCM command-line interpreter and
returns control to the COM1 port.
Resets the system.
Specifies a string that defines the time to wait for
the remote pager to respond to a dial-out, and a
message to be sent to the remote pager.