Compaq AlphaServer 160 User Manual page 159

Table 8–2 Status Command Fields (Continued)
Field
OCP power switch
OCP halt
OCP secure
Remote access
Remote user
Alerts
Modem password
Modem init string
Modem dial string
Modem alert string
Alert pending
Most recent alert
Meaning
Indicates the position of the control panel keyswitch
and Halt button. In this case, the keyswitch is in the
Off position and the Halt button is not pushed in. The
OCP is in a nonsecure state.
Remote access to the system is disabled or enabled.
A remote user is either not connected, as in the
example, or connected.
Alert status is reported: Enabled or Disabled. Possible
alerts are listed in Section 8.7.6.
The modem password is displayed.
Modem initialization string set by the set init
command.
Modem dial string, set by the set dial command.
Modem alert string, set by the set alert command.
Yes = Alert has been triggered.
No = No alert has been triggered.
Tells the cause of the most recent alert.
Using the System Control Manager 8-19