Displaying The System Configuration; Show Boot Command - Compaq AlphaServer GS80 User Manual

7.2

Displaying the System Configuration

View the system hardware configuration from the SRM console. It is
useful to view the hardware configuration to ensure that the system
recognizes all devices,
connections.
Use the following SRM console commands to view the system configuration.
Additional commands to view the system configuration are described in the
AlphaServer GS80/160/320 Firmware Reference Manual.
Displays the boot environment variables.
show boot*
show config Displays the logical configuration of interconnects and buses
on the system and the devices found on them.
Displays the bootable devices and controllers in the system.
show device
show fru Displays the physical configuration of FRUs (field-replaceable
units).
show memory Displays configuration of main memory.
7.2.1

Show Boot Command

Use the show boot* command to list the boot environment variables.
Example 7–2 Show Boot*
P00>>> show boot*
boot_dev
boot_file
boot_osflags
boot_reset
bootdef_dev
booted_dev
booted_file
booted_osflags
memory configuration,
dka0.0.0.1.1
a
OFF
dka0.0.0.1.1
and network
Operation 7-7