Setting The Control Panel Message; Set Ocp_Text Command - Compaq AlphaServer 160 User Manual

Table 7–3 Special Characters for SRM Console (Continued)
Character
Ctrl/Q
Ctrl/R
Ctrl/S
Ctrl/U
*
" "
#
7.1.2

Setting the Control Panel Message

When the operating system is running, the control panel displays the
console revision. It is useful to create a customized message if you
have a number of systems and you want to identify each system by a
node name. Use the set ocp_text command.
Example 7–1 Set Ocp_Text Command
SCM_E0> set ocp_text nodenamealpha
power on......
.
.
SCM_EF> sho ocp
Line0: nodenamealpha
Line1: Power ON
Line2: Cpu-10 Mem-6
Line3: Keyswitch-ON
7-6 AlphaServer GS80/160/320 User's Guide
Function
Resumes output to the console device that was suspended
by Ctrl/S.
Redisplays the current line. Deleted characters are
omitted. This command is useful for hardcopy terminals.
Suspends output to the console device until Ctrl/Q is
entered. Cleared by Ctrl/C.
Deletes the current line.
Wildcarding for commands such as show.
Double quotes enable you to denote a string for
environment variable assignment.
Specifies that all text between it and the end of the line is
a comment. Control characters are not considered part of
a comment.
Pci-6