Chapter 6: 4620SW/4621SW SIP IP Telephone
Introduction
This chapter describes how to set or view telephone parameters, including:
Displaying the Phone screen on dialing/answering
●
Personalizing the ringing pattern
●
Determining if you want the Redial feature to redial the last number called or select from a
●
list of the last six calls
Displaying the Call Timer
●
Selecting attended or unattended call transfer
●
Changing the rate at which the telephone displays messages
●
Changing the display area contrast
●
Logging off
●
Backing up and restoring Speed Dial button data, Feature button labels, and Options
●
settings
Personalizing Feature button labels
●
Selecting a different language for the 4620SW/4621SW user interface
●
Changing the width of displayed call appearances
●
Allowing the Voice message light to flash when the telephone rings
●
Disabling and reenabling the Call Log
●
This chapter also covers how to verify the status of certain telephone/server interactions. This
information can be useful in troubleshooting problems or when discussing telephone operation
with your System Administrator.
Note:
Your Telephone Administrator can turn off all user-settable options. If all options
Note:
are disabled, pressing the Options (
confirming you cannot set/change any options. If a specific option is disabled,
that option no longer displays on the Options Main Screen. Pressing the
unlabeled Line/Feature button for a disabled option has no effect.
Options
) button displays a message
Issue 2.2 August 2005
59