Adding A Speed Dial Button For A Web Site Telephone Number Or Uri - Avaya 4620SW User Manual

Using the Web Access Application
Adding a Speed Dial Button for a Web Site Telephone
Number or URI
Some Web sites might include the ability to pass names and associated telephone numbers/
URIs to the telephone. In such cases, applicable Web pages display an AddToSD softkey, as
provided by the Web site author.
1. Press the AddToSD softkey.
The Speed Dial Field Selection screen displays the prompt "Select field to change.".
Note:
For information on entering information on this screen, see
Note:
Speed Dial Screens
Your Telephone Administrator can turn off the ability to create Speed Dial buttons
from the Web application. In this case, the telephone does not display the
AddToSD softkey.
2. Choose one of the following options
:
If you want to
Change the name
Change the telephone
number
56 4620SW/4621SW SIP IP Telephone Release 2.2 User Guide
in Chapter 3: Using the Speed Dial
Then
Press the Line/Feature button next to the Name: field.
The Speed Dial Name Entry screen displays the prompt
"Use dialpad to enter Name.".
Use the Left Arrow softkey or the Right Arrow softkey
to move the cursor to the right of the character(s) to be
changed. Press the Backspace button to remove the
character(s) and reenter the character(s). The Name
field allows up to 13 characters. For more information,
see Entering a Name
Press the Line/Feature button next to the Number: field.
The Speed Dial Number Entry screen displays the
prompt "Use dialpad to enter Number.".
Use the Left Arrow softkey or the Right Arrow softkey
to move the cursor to the right of the character(s) to be
changed. Press the Backspace button to remove the
character(s) and reenter the character(s). The Number
field allows up to 24 characters. For more information,
see Entering a Number
Entering Data on
Application.
on page 35.
on page 36.
1 of 2