Deleting A Speed Dial Button Label - Avaya 4620SW User Manual

7. When the update is complete, press the Save softkey to add the information to a Speed Dial
button. Press the Cancel softkey to exit without saving.
The name/number or URI entry is updated, and all Speed Dial buttons are sorted in
alphabetical order by name. The Speed Dial Main screen redisplays.
8. To update another Speed Dial button, repeat this procedure from Step 2.
9. To exit the Speed Dial application, press the Phone/Exit (

Deleting a Speed Dial Button Label

To delete a Speed Dial button label:
1. Access the Speed Dial Application by pressing the SpDial softkey.
The telephone displays the Speed Dial Main screen.
2. Use the Page Left or Page Right buttons as appropriate until the screen displays the entry
you want to delete.
Note:
Your Telephone Administrator can turn off the ability to make changes to the
Note:
Speed Dial buttons. If this is the case, you are not shown softkeys labeled Add,
Edit, or Delete, and you cannot perform any of those actions.
3. Press the Delete softkey.
The top line displays the prompt "Select label to delete.".
4. Press the Line/Feature button associated with the button you want to remove.
The Speed Dial Deletion screen displays the prompt "Press Delete again to confirm.".
5. Visually verify that you want to delete that name and number or URI, then choose one of the
following options:
If you want to
Cancel the deletion without removing this
Speed Dial button
Complete removing this Speed Dial button
Deleting a Speed Dial Button Label
) button.
Then
Press Cancel.
No deletion occurs and the telephone
displays the Speed Dial Main screen.
Press Delete.
The label is removed. The remaining
Speed Dial buttons are sorted by name.
The Speed Dial Main screen displays the
page from which the entry was removed.
Issue 2.2 August 2005 43