Displaying Lldp Neighbors Information - Cisco SF500-24 Administration Manual

Configuring Discovery
Configuring LLDP
STEP 1
Cisco 500 Series Stackable Managed Switch Administration Guide
• ECS ELIN—Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
Network Policy Table
• Application Type—Network policy application type, for example, Voice.
• VLAN ID—VLAN ID for which the network policy is defined.
• VLAN Type—VLAN type for which the network policy is defined. The
possible field values are:
Tagged
- —Indicates the network policy is defined for tagged VLANs.
Untagged
- —Indicates the network policy is defined for untagged VLANs.
• User Priority—Network policy user priority.
• DSCP—Network policy DSCP.

Displaying LLDP Neighbors Information

LLDP Neighbors Information
The
from neighboring devices.
After timeout (based on the value received from the neighbor Time To Live TLV
during which no LLDP PDU was received from a neighbor), the information is
deleted.
To view the LLDP neighbors information:
Click Administration > Discovery - LLDP > LLDP Neighbors Information. The
LLDP Neighbors Information
This page displays the following fields:
• Local Port—Number of the local port to which the neighbor is connected.
• Chassis ID Subtype—Type of chassis ID (for example, MAC address).
• Chassis ID—Identifier of the 802 LAN neighboring device's chassis.
• Port ID Subtype—Type of the port identifier that is shown.
• Port ID—Identifier of port.
• System Name—Published name of the switch.
page displays information that was received
page opens.
9
114