Chapter 25: Console Menu Interface; Connecting By Using A Terminal Emulation Application - Cisco SF500-24 Administration Manual

Console Menu Interface

Connecting By Using a Terminal Emulation Application

STEP 1
STEP 2
STEP 3
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide
The switch provides a menu-driven console interface for basic configuration of the
switch. The console interface is useful for switch configuration when the switch
does not have a defined IP address, the IP address is not known, or only a direct
serial cable connection can be used to communicate with the switch.
A connection between the switch and your PC can be established by using a
serial cable, by establishing a Telnet session, or by using terminal emulation
application.
This section covers the following topics:
• Connecting By Using a Terminal Emulation Application
• Connecting By Using Telnet
• Console Configuration Menu Navigation
• Console Interface Main Menu
To establish a connection to the console interface by using a terminal emulation
application (Microsoft HyperTerminal in Windows XP is used here as an example),
configure the application as follows:
In the PC desktop, click the Start button.
Select Programs > Accessories > Communications > HyperTerminal. The
HyperTerminal - Connection Description window displays.
Enter a name for this connection, and optionally select an icon for the application
shortcut that is created.
Click OK. The Connect To window displays.
25
449