Configuring Discovery
Configuring LLDP
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
Displaying LLDP Port Status
LLDP Port Status Table
The
port.
To view the LLDP port status, click Administration > Discovery - LLDP > LLDP
LLDP Port Status
Port Status. The
Click LLDP Local Information Detail to see the details of the LLDP and LLDP-MED
TLVs sent to the neighbor.
Click LLDP Neighbor Information Detail to see the details of the LLDP and LLDP-
MED TLVs received from the neighbor.
LLDP Port Status Global Information
•
Chassis ID Subtype—Type of chassis ID (for example, MAC address).
•
Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the switch is displayed.
•
System Name—Name of switch.
•
System Description—Description of the switch (in alpha-numeric format).
•
Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
•
Enabled System Capabilities—Primary enabled function(s) of the device.
•
Port ID Subtype—Type of the port identifier that is shown.
LLDP Port Status Table
•
Interface—Port identifier.
•
LLDP Status—LLDP publishing option.
•
LLDP MED Status—Enabled or disabled.
•
Local PoE—Local PoE information advertised.
•
Remote PoE—PoE information advertised by the neighbor.
•
# of neighbors—Number of neighbors discovered.
•
Neighbor Capability of 1st Device—Displays the primary functions of the
neighbor, for example: Bridge or Router.
page displays the LLDP global information for every
page opens.
9
110