Cisco SF500-24 Administration Manual page 50

500 series stackable managed switch
Hide thumbs Also See for SF500-24:
Table of Contents

Advertisement

Managing System Files
Downloading or Backing-up a Configuration or Log
Cisco 500 Series Stackable Managed Switch Administration Guide
If the server is selected by name in the Server Definition, there is no
NOTE
need to select the IP Version related options.
c. IPv6 Address Type—Select the IPv6 address type (if used). The options are:
-
Link Local—The IPv6 address uniquely identifies hosts on a single
network link. A link local address has a prefix of FE80, is not routable,
and can be used for communication only on the local network. Only one
link local address is supported. If a link local address exists on the
interface, this entry replaces the address in the configuration.
-
Global—The IPv6 address is a global Unicast IPV6 type that is visible
and reachable from other networks.
d. Link-Local Interface—Select the link local interface from the list.
e. TFTP Server—Enter the IP address of the TFTP server.
f.
Source File Name—Enter the source file name. File names cannot contain
slashes (\ or /), the leading letter of the file name should not be a period (.), and
the file name should be between 1 and 160 characters. (Valid characters: A-Z,
a-z, 0-9, ".", "-", "_").
g. Destination File Type—Enter the destination configuration file type. Only valid
file types are displayed. (The file types are described in the
Types
section.)
Backup Save Action—Specifies that a file type is to be copied to a file on another
device. Enter the following fields:
a. Server Definition—Select whether to specify the TFTP server by IP address
or by domain name.
a. IP Version—Select whether an IPv4 or an IPv6 address is used.
b. IPv6 Address Type—Select the IPv6 address type (if used). The options are:
Link Local—The IPv6 address uniquely identifies hosts on a single network
link. A link local address has a prefix of FE80, is not routable, and can be used
for communication only on the local network. Only one link local address is
supported. If a link local address exists on the interface, this entry replaces
the address in the configuration.
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
c. Link-Local Interface—Select the link local interface from the list.
4
Files and File
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents