Cisco SF500-24 Administration Manual page 339

Configuring Security
Configuring 802. 1 X
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 500 Series Stackable Managed Switch Administration Guide
• Absolute Starting Time—Define the absolute start time:
- Immediate—Click to indicate that the time range starts when the time
range is created.
- Date and Time—Select the absolute start date and time.
• Absolute Ending Time—Define the absolute end time:
- Infinite—Click to indicate that the time range never ends.
- Date and Time—Select the absolute end date and time.
Click Apply. The time range is created.
Defining a Recurring Range
The Recurring Range page enables the creation of a recurring range that can then
be added to a time range created in the Time Range page.
All time specifications are interpreted as local time (Daylight Saving Time does not
affect this).
To add a recurring time range:
Click Security > 802.1X > Recurring Range. The Recurring Range page is
displayed.
This page displays the recurring time ranges that have been defined.
Click Add, and the Add Recurring Range page is displayed.
Enter the parameters.
• Time Range Name—Select the time range to which the recurring range will
be added.
• Recurring Starting Time—Enter the day of the week and the time at which
the recurring range begins.
• Recurring Ending Time—Enter the day of the week and time on which the
recurring range ends.
Click Apply. The recurring range is added to the time range.
18
330