Cisco SF500-24 Administration Manual page 99

System Time
Configuring System Time
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco 500 Series Stackable Managed Switch Administration Guide
Workflow
Enable authentication in the SNTP Authentication page.
Create a key in the SNTP Authentication page.
Associate this key with an SNTP server in the SNTP Unicast page.
To enable SNTP authentication and define keys:
Click Administration > Time Settings > SNTP Authentication. The SNTP
Authentication page opens.
Select SNTP Authentication to support authentication of an SNTP session
between the switch and an SNTP server.
Click Apply to update the switch.
Add SNTP Authentication
Click Add. The
Enter the following parameters:
• Authentication Key ID—Enter the number used to identify this SNTP
authentication key internally.
• Authentication Key—Enter the key used for authentication (up to eight
characters). The SNTP server must send this key for the switch to
synchronize to it.
• Trusted Key—Select to enable the switch to receive synchronization
information only from a SNTP server by using this authentication key.
Click Apply. The SNTP Authentication parameters are written to the Running
Configuration file.
page opens.
7
90