Snmp Notification Filters - Cisco SF500-24 Administration Manual

Configuring SNMP

SNMP Notification Filters

STEP 4
SNMP Notification Filters
STEP 1
STEP 2
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
Authentication
-
Privacy
- —Indicates the packet is both authenticated and encrypted.
• Notification Filter—Select to enable filtering the type of SNMP notifications
sent to the management station. The filters are created in the Notification
Filter page.
• Filter Name—Select the SNMP filter that defines the information contained
in traps (defined in the Notification Filter page).
Click Apply. The SNMP Notification Recipient settings are written to the Running
Configuration file.
The Notification Filter
Object IDs (OIDs) that are checked. After creating a notification filter, it is possible
to attach it to a notification recipient in the Notification Recipients SNMPv1,2
Notification Recipients SNMPv3
page, and
The notification filter enables filtering the type of SNMP notifications that are sent
to the management station based on the OID of the notification to be sent.
To define a notification filter:
Click SNMP > Notification Filter. The
Notification Filter
The
table is able to filter notification entries by Filter Name.
Add Notification Filter
Click Add. The
Enter the parameters.
• Filter Name—Enter a name between 0-30 characters.
—Indicates the packet is authenticated but not encrypted.
page enables configuring SNMP notification filters and
Notification Filter
page displays notification information for each filter. The
page is displayed.
page.
page is displayed.
22
422