Default Configuration; Data Collection Settings - Intermec CV41 User Manual

Default Configuration

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
The following tables list the default values of the configuration
settings supported on the computer. If you restore the computer to
factory default settings, the computer uses these values.
The settings are grouped by function and reflect the organization of
Intermec Settings. Not all of the configuration settings are listed in
this appendix. For detailed information on most of the settings, see the
Intermec Settings Command Reference

Data Collection Settings

Use data collection settings to configure the Bluetooth or tethered
scanner and to configure the bar codes that you want the imager to be
able to read.
Data Collection Settings
Data Collection for Tethered Scanner Setting
Tethered-Configure On Connect
Enable USB Scanner Aut-Detect
Enable Scanner Port
Bluetooth-Configure On Connect
Symbology Settings
Symbology
AustraliaPost
Aztec
BPO
CanadaPost
Codabar
Codablock A
Codablock F
Code 11
Code 39
Appendix A — Specifications and Default Settings
Manual.
Default Value
Overwrite with computer
settings
Off
Off
Overwrite with computer
settings
Default Value
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Enable
107