Adjust The Screen Brightness; Enable Automatic Screen Brightness - Intermec CV41 User Manual

Chapter 1 — About the Computer

Adjust the Screen Brightness

Enable Automatic Screen Brightness

18
Depending on the current lighting conditions of the environment, you
may want to adjust the screen brightness of the CV41.
Note: If automatic screen brightness is enabled, you cannot adjust the
screen brightness on the CV41.
1 On the keypad, tap the ALT key to enable the secondary keys.
2 Tap F7 to increase brightness or F8 to decrease the brightness.
3 Repeat Steps 1 and 2 to increase or decrease brightness.
If your computer is equipped with an outdoor display, enable
automatic brightness control to allow the computer to automatically
adjust the screen brightness depending on the current lighting
conditions.
1 Tap Start > Control Panel > Screen. The Screen Control screen
appears.
2 Select Enable Automatic Brightness Control.
3 In Low to medium light level (%), enter the brightness value you
want to have in low to medium light conditions.
4 In Medium to high light level (%), enter the brightness value you
want to have in medium to high light conditions.
5 Tap OK.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual