Select Wireless Security As Your Security Choice - Intermec CV41 User Manual

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
Use Open (No Security) Associations With Microsoft Security
Use the following procedure to configure your computer for open
security using Microsoft WZC.
1 Make sure the communications and radio parameters on your
computer are configured.
2 Tap Start > Network Connections. The Network Connections
screen appears.
3 Tap and hold onto the Wireless Network Connection icon until
the pop-up screen appears and select Properties.
4 Tap the Wireless Networks tab.
5 Make sure your wireless network you are configuring is selected
and tap the Properties button.
6 For Network Authentication, choose Open.
7 For Data Encryption, choose Disabled.
8 Tap OK. Your settings are saved.

Select Wireless Security as Your Security Choice

Microsoft security is enabled by default. To use Wireless scurity, you
need to select it as your security choice to use it. After you select
Wireless security as your security choice, you will be prompted to save
your settings and reset the computer for your changes to take effect.
Select Wireless Security
Use the following procedure to select Wireless security.
1 Start Intermec Settings. For help, see
on page 43.
2 Choose Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Wireless Security. An alert
box appears telling you that you must save your settings and reboot
the computer for the new security choice to take effect.
4 Tap Yes. The computer resets and starts with Microsoft Security as
the Security Choice.
Chapter 4 — Configure the Computer
"Start Intermec Settings"
63