Chapter 5 — Use WWAN and GPS Communications
About GPS
Test the GPS Receiver
Configure WWAN Settings
76
The GPS receiver in the computer can deliver standards-based
National Marine Electronics Association (NMEA) data strings to GPS
applications. To use the GPS receiver, you need to:
enable WWAN communications.
•
•
install an external GPS antenna to the CV41. For more
information, see
For more information on purchasing an external GPS antenna,
contact your local Intermec representative.
Use this section to learn how to test the GPS receiver.
1 Make sure WWAN communications is enabled. For more
information, see
page
71.
2 Make sure an external GPS antenna is connected. For more
information, see
3 Select Start > All Programs > OneClick Internet > OneClick
Internet.
4 Tap the GPS button. The coordinates for your location are
displayed. To show your current location in Google Maps, tap
Track Me.
Configure your connection settings to AutoLaunch the OneClick
Internet application on startup, connect to WWAN automatically, or
to reconnect to WWAN when a connection is available.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
"Connect an External Antenna" on page
"Use WWAN and GPS Communications" on
"Connect an External Antenna" on page
21.
21.