Change The Pin Number; Configure Network Connections - Intermec CV41 User Manual

Chapter 5 — Use WWAN and GPS Communications

Configure Network Connections

78
3 To deactivate your PIN number, clear the Activate PIN check box
and enter your current PIN number.
To activate your PIN number, select the Activate PIN check box
and enter your current PIN number.

Change the PIN Number

Use this section to learn how to change your PIN number.
1 Tap Start > All Programs > OneClick Internet > OneClick
Internet. The Oneclick Internet application opens.
2 Tap the Settings button and select the PIN tab.
3 To change your PIN, select the Change PIN check box and enter
your current PIN number, your new PIN number, and verify your
new PIN number.
Use this section to learn how to connect to a specific data connection
method or to a specific network.
Note: If you are on CDMA communcations, you cannot specify a
specific network to connect to..
1 Tap Start > All Programs > OneClick Internet > OneClick
Internet. The Oneclick Internet application opens.
2 Tap the Settings button and select the Network tab.
3 Tap Select Connection and choose the specific data connection
you want to use. If Select Automatically is chosen, the computer
automatically selects the network with the strongest signal.
4 Tap Network Selection and select the network operator you want
to use.
5 Tap Apply to save your settings.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual