Activate Cdma Communications - Intermec CV41 User Manual

Activate CDMA Communications

CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
To activate the CDMA radio module in your computer, you need to
contact your wireless carrier and set up an account for each computer.
The following table lists the carriers that Intermec currently supports.
If your carrier is not listed in the table, please contact Intermec product
support to see if it is now supported.
Currently Supported Carriers
Country
United States
The carrier will require the International Mobile Equipment Identity
number (IMEI) to start the activation process. You can find the IMEI
number in the OneClick Internet application, tap Settings and the
Info tab.
After you supply the IMEI number to your carrier, they will respond
with values that you must enter in the OneClick (if required). Your
carrier sales contact and an Intermec representative can guide you
through the process.
1 Press the Power button. The computer turns off.
2 Connect an external WWAN antenna. For more information, see
"Connect an External Antenna" on page
3 Press the Power button again to turn on the computer.
4 Select Start > All Programs > OneClick Internet > OneClick
Internet. The Oneclick Internet application opens.
5 Tap Settings and select the General tab.
6 Select Automated Activation and tap Next.
7 Enter *22899 in the text field and tap Next. CDMA
communications is activated.
8 Verify your settings by tapping Settings in the OneClick Internet
application and selecting the Network tab.
Chapter 5 — Use WWAN and GPS Communications
Carriers
Verizon
21.
75