Choose Between Microsoft And Wireless Security - Intermec CV41 User Manual

Chapter 4 — Configure the Computer

Choose Between Microsoft and Wireless Security

58
You must use either Wireless or Microsoft security to implement your
security solution. For details, see the next section,
Microsoft and Wireless Security."
always implement WPA2 security using PSK (Personal) or 802.1X
(Enterprise) key management.
If you are using WPA-802.1x, WPA2-802.1x, or 802.1x security, this
section also assumes that your authentication server and
authenticators are properly configured.
Note: Your security choice does not depend on your authentication
server. For example, you can choose Wireless security if you use
Microsoft Active Directory® to issue certificates.
The computer supports both Wireless and Microsoft security, which
dynamically select wireless networks based on your preferences. The
option you choose depends on your network security needs.
• If you are primarily using the computer to connect to Wi-Fi
hotspots, you may want to use Microsoft security.
Microsoft security is enabled by default. If it is not, enable it. For
help, see "Select Microsoft Security" on page 59
• If you are using the computer in a static environment that requires
a high level of security, you should use Wireless security, which
offers CCX v4.0 compliance, support for LEAP and TTLS, and
configuration for up to four profiles.
To use Wireless security, you need to select Wireless security as your
seucrity choice and select profile. For help, see the next section,
"Select a Wireless Security Profile" on page
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
"Choose Between
Intermec recommends that you
64.