Attach The Cv41 To The Smart Dock - Intermec CV41 User Manual

Chapter 1 — About the Computer

Attach the CV41 to the Smart Dock

6
After you secure the smart dock and connected it to power, you can
attach the computer to the smart dock.
1 Press the Power button . The computer turns off.
2 Locate the protruding lip on the rear of the computer.
3 Place the lip of the computer over the top of the dock.
4 Slide the CV41 from side-to-side until the computer is seated into
the smart dock.
5 Push down onto the smart dock until you hear click.
6 If necessary, adjust the viewing angle by adjusting the pivot arm on
the RAM mount.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual